Fabric Garden Hose – Grey, Aluminium Valve Fittings
· PVC fibre reinforced, 8 bar working pressure (1/2")
· High-density woven jacket, helix steel wire
· Aluminium fittings with quarter-turn shut-off valve
· Spare washers included, 25 / 50 / 75 / 100 ft
Why Choose the Grey Fabric Garden Hose
Grey is the colour that survives a working garden. Dust, fertiliser and the grey-brown film that collects on anything left outdoors for a season do not show on it, so it still looks new in the second year when a bright hose already looks tired.
Aluminium Shut-Off Valve Fittings
The hardware is the difference here. Both ends are reinforced aluminium rather than brass, and the outlet carries a quarter-turn shut-off valve you can work with one hand. That valve is the reason this version gets picked for raised beds and greenhouses: you shut the water at the end of the hose instead of walking back to the tap, then move the whole thing without spraying the path.
PVC Fibre Reinforced Construction
The tube inside is PVC, reinforced with a fibre layer and stabilised by a helix steel wire under the woven jacket. Working pressure is 8 bar in the 1/2-inch bore, with a burst rating of 24 bar — three times the working figure, which is what absorbs a kink or a closed nozzle without splitting the wall.
Lengths and Storage
Standard lengths are 25, 50, 75 and 100 ft. Coil it loose, drain it through the valve, and it stores flat on a hook.
Size (inch) | ID (mm) | OD (mm) | m/roll | Weight (kg/roll) | W.P. (bar) | B.P. (bar) |
1/4" | 6 | 10 | 100 | 6.8 | 10 | 30 |
1/4" | 6 | 11 | 100 | 9 | 10 | 30 |
1/4" | 6 | 12 | 100 | 8.5 | 10 | 30 |
5/16" | 8 | 12 | 100 | 11.2 | 10 | 30 |
5/16" | 8 | 13 | 100 | 11.2 | 10 | 30 |
5/16" | 8 | 14 | 100 | 14 | 10 | 30 |
3/8" | 9 | 13 | 100 | 9.4 | 9 | 27 |
1/2" | 12 | 16 | 50 | 11.9 | 8 | 24 |
1/2" | 12 | 18 | 50 | 9.6 | 8 | 24 |
1/2" | 13 | 17 | 50 | 6.4 | 7 | 21 |
1/2" | 13 | 18 | 50 | 8.2 | 7 | 21 |
5/8" | 15 | 20 | 50 | 9.3 | 6 | 18 |
5/8" | 16 | 20 | 50 | 7.7 | 6 | 18 |
3/4" | 19 | 24 | 50 | 11.4 | 5 | 15 |
3/4" | 19 | 25 | 50 | 14 | 5 | 15 |
3/4" | 19 | 26 | 50 | 16.7 | 5 | 15 |
7/8" | 22 | 27 | 50 | 13 | 5 | 15 |
7/8" | 22 | 28 | 50 | 15.9 | 5 | 15 |
1" | 25 | 30 | 50 | 14.6 | 5 | 15 |
1" | 25 | 31 | 50 | 17.8 | 5 | 15 |
1" | 25 | 32 | 50 | 21.2 | 5 | 15 |
1-1/4" | 32 | 39 | 50 | 26.4 | 5 | 15 |
1-1/4" | 32 | 40 | 50 | 30.5 | 5 | 15 |
1-1/2" | 38 | 46 | 50 | 35.6 | 4 | 15 |
1-1/2" | 38 | 48 | 50 | 45.3 | 4 | 15 |
2" | 50 | 59 | 50 | 52 | 4 | 12 |
2" | 50 | 60 | 50 | 58.3 | 4 | 12 |
2-1/2" | 64 | 78 | 50 | 105.4 | 4 | 12 |
caliber | ID (mm) | OD (mm) | W.P. (bar) | B.P. (bar) | Applicable |
1/2" | 12 | 16 / 18 | 8 | 24 | The caliber used for this product |
1/2" | 13 | 17 / 18 | 7 | 21 | Same as above, but with different wall thickness. |
5/8" | 15 / 16 | 20 | 6 | 18 | Higher traffic, courtyard/car wash |
3/4" | 19 | 24–26 | 5 | 15 | Supervisor, Long-distance |
FAQ:
1. Fabric Garden Hose – Why aluminium fittings instead of brass?
Aluminium keeps the weight down and costs less than brass at the same strength. The trade-off
is that it should not be left screwed onto a tap through a freezing winter, where trapped water
can split any metal fitting.
2. Fabric Garden Hose – How does the shut-off valve work?
It sits at the outlet end and turns a quarter turn. Close it to stop flow at the hose end, change
the nozzle, or move the hose without going back to the tap. The hose stays pressurised behind it,
so release the pressure before you store it.
3. Fabric Garden Hose – What pressure is it rated for?
8 bar working / 24 bar burst in the 1/2-inch bore. Treat the burst figure as a safety margin,
not an operating target.
4. Fabric Garden Hose – Will the grey fade?
Less than a saturated colour, because the jacket is already neutral. UV is still what ages a
fabric hose, so store it out of direct sun when you can.
5. Fabric Garden Hose – What comes with it?
The hose, the valve fitting set at the outlet, a spray gun, and spare washers.
6. Fabric Garden Hose – Can it stay out in winter?
Drain it through the valve before the first hard freeze. Aluminium fittings should not be left
screwed onto a tap through a frost, where trapped water can split them.