Innovative Garden Products, Tailored for Your Brand

Same Hose, Three Colours: Which One Should Your Catalogue Actually Carry?

QINGDAO, China — November 2026 — Three new colourways of the three-layer PVC garden hosehave gone live this month: yellow with a black stripe, deep green with a white stripe, and black with a green stripe. Underneath the colour they are the same product — a flexible PVC tube, a high-tensile textile braid, a UV-stabilised cover, 17 bore and roll sizes from 5/32 to 2 inches, and a working range of 4 to 12 bar. What differs is the job each colour does once it leaves the container. Qingdao Wanbang Huasheng Trading Co., Ltd. answers the questions distributors and brand owners have asked since the range went up — starting with the one that decides the order: which of the three belongs in your catalogue.

Understanding the Three PVC Garden Hose Colourways

Three new products (Product Introduction)

PVC Garden Hose – Yellow, Black Stripe

Yellow PVC garden hose with black stripe on bulk roll

Utility, hire fleets and site work

High-visibility yellow with a black stripe, for the hose that has to be found rather than admired. It is the colour specified where a coil gets left behind, cut by mistake or lost among someone else's kit — utility work, rental fleets, service yards. The stripe breaks up the coil so it reads as a hose on the ground. 17 sizes, 4–12 bar, full rolls of 40, 50 or 100 m.

PVC Garden Hose – Deep Green, White Stripe

Deep green PVC garden hose with white stripe on roll

Garden centres and landscaped retail

Deep green with a white stripe, the pair garden centres and landscapers tend to settle on: it disappears into a border instead of competing with it, and the white stripe keeps a rack of rolls readable when a customer is choosing a size. It is the retail-facing colour of the three — the one that has to look right next to plants rather than next to a pump.

PVC Garden Hose – Black, Green Stripe

Black PVC garden hose with green stripe on bulk roll

Private label and dark packaging

Black body, green stripe, for brand owners whose fittings, reels and packaging are dark. Handling marks, dust and the pale scuff a bright hose picks up in its first month all show less on a black wall — which matters for product photography and for how the roll looks on a customer's shelf. Body colour, stripe colour, wall print, box and label can all be re-run to your sample.

Customer Questions → Solution Comparison Table

Questions raised by the customer

Our solution

Corresponding Specifications / Basis

Colour looks worn after one season

Confirm the colour is in the compound, not a surface coating

Compounded colour plus UV-stabilised cover; wear shows as scuffing, not patches

A bigger bore was supposed to raise pressure

Size the bore to the flow, then check the pressure rating

12 bar at 5/32 in, falling to 4 bar at 2 in

Hose goes stiff or cracks over winter

Drain, store out of sun, hang or reel

Standing water inside a coil shortens life more than working pressure does

Private-label logo prints poorly

Check the artwork against the print method before the run

Thin strokes, small reverses and fine gradients do not hold on curved PVC

Delivery misses the shelf date

Count lead time from artwork approval, not from the PO

30–45 days, with printed packaging counted from approval

Customer asks about drinking water

Say so at enquiry — the standard compound is not for potable water

A food-grade compound is quoted separately

Complete Parameter Table

The three colourways share one specification. There are 17 bore and roll sizes from 5/32 to 2 inches, and the table below applies to all three — working pressure 4–12 bar, burst 15–70 bar, quoted at 20 °C.

Bore

ID (mm)

OD (mm)

Roll (m)

Working (bar)

Burst (bar)

Weight (kg)

Pack D×H (mm)

5/32"

4

9

100

12

70

6.0

340×100

1/4"

6

11

100

10

60

8.0

350×130

5/16"

8

13

100

10

50

10.0

390×150

3/8"

9

14

100

10

45

11.0

430×170

3/8"

10

15

100

9

45

12.0

440×160

1/2"

12

17

100

8

40

14.0

460×180

1/2"

13

18

100

8

40

15.0

460×170

5/8"

16

21

50

8

32

9.0

460×160

5/8"

16

21

100

8

32

16.0

540×200

3/4"

19

25

50

8

28

12.5

530×170

3/4"

19

25

100

8

28

25.0

660×200

27/32"

22

28

50

6

25

14.5

650×140

1"

25

31

50

6

22

15.0

660×200

1"

25

31

100

6

22

30.0

840×280

1-1/4"

32

39

50

5

20

25.0

820×280

1-1/2"

38

46

40

5

18

26.0

890×230

2"

50

60

40

4

15

40.0

1060×230

FAQ

Q1. Are the three new colourways the same hose underneath?

Yes. All three are the standard three-layer PVC construction: a flexible PVC tube, a high-tensile textile braid bonded between tube and cover, and a UV-stabilised outer cover. The bore range, roll lengths, pressure ratings and temperature range are identical across the three — 5/32 to 2 inches, full rolls of 40, 50 or 100 m depending on bore, 4 to 12 bar working pressure, −10 °C to +60 °C. What changes is the body colour and the stripe colour, both set in the compound rather than applied on top. So the choice between them is a channel decision, not a performance decision.

Q2. Which of the three should a distributor stock first?

It follows the channel rather than the catalogue. Yellow with a black stripe is the working colour: it is specified where a hose has to be found — on a site at dusk, in a rental fleet where everything gets mixed up, at the back of a service yard — and the black stripe breaks up the coil so it reads as a hose rather than a bright tangle on the ground. Deep green with a white stripe is the garden-centre and landscaper colour: it disappears into a border instead of competing with it, and the white stripe keeps a rack of rolls readable when a customer is choosing a size. Black with a green stripe is the private-label colour: it sits next to dark fittings, dark reels and dark packaging, and handling marks, dust and the pale scuff a bright hose picks up in its first month all show less on a black wall.

Q3. Does the colour fade, or does it wear the way a coating does?

That is the difference worth asking about at quotation stage. Because the colour is compounded rather than coated, a yellow hose scuffs at the wear points instead of losing colour in patches — which is what happens when a surface colour is laid over a dark tube. The outer cover is UV-stabilised, so the stripe does not lift in sunlight the way print does. No hose colour is immune to years of direct sun, though, and storage under cover is what extends service life. If a supplier cannot tell you whether the colour is in the compound, that is the answer in itself.

Q4. Will a larger bore fix low pressure at the end of the run?

No — and it usually makes the number worse. Working pressure falls as bore rises: 12 bar at 5/32 inch, 10 bar from 1/4 to 3/8, 8 bar at 1/2 to 3/4, 6 bar at 27/32 and 1 inch, 5 bar at 1-1/4 and 1-1/2, and 4 bar at 2 inch. Burst ratings follow the same order, from 70 bar down to 15 bar. A large bore moves volume; it does not create pressure. The correct sequence is to match the bore to the flow the job needs, then check that bore's rating against the pump — not to read the biggest number on the datasheet and assume it applies to the size being ordered.

Q5. What is the minimum order, and can I buy a single roll?

The quoted minimum is one tonne (1,000 kg) per size, supplied in full rolls — 40, 50 or 100 m depending on bore, with no cut lengths. Mixed-size orders are quoted individually rather than at a blended rate, because the roll length and packing change with bore. If you are testing a colour before committing a container, say so at enquiry: the honest answer is that samples and small trial quantities are a separate conversation from the production minimum, and it is better to have that conversation before the order than after.

Q6. Can our logo go on the hose, and what usually goes wrong?

Yes — on the wall of the hose, on the printed colour box, or on the roll label. What goes wrong is almost always the artwork rather than the printing: a logo that reads well on paper does not necessarily hold on a curved PVC surface running at line speed, and thin strokes, small reverses and fine gradients are the usual casualties. Artwork is checked against the print method before the run starts, which is why the lead time for a printed order counts from artwork approval rather than from the purchase order. Allow 30 to 45 days from confirmation.

Q7. Can the hose be used for drinking water?

Not in the standard compound. The standard formulation is not intended for potable water, and that applies to all three colourways equally — the colour does not change the compound's suitability. If the hose will carry drinking water, state it at enquiry and a food-grade compound is quoted instead. This is worth settling before the order rather than after, because it is a formulation decision, not an accessory.

Q8. Will a black hose get too hot in summer?

Black absorbs more solar heat than green or yellow, so a black hose lying empty in full sun will run hotter than a light one. With water moving through it the difference is small, because the water carries the heat away. The practical rule is the same for every colour: do not store any hose empty in direct sun. Coiled on a reel or hung, drained, and out of direct sunlight is what a hose wants between seasons — and standing water left inside a coil shortens its life more than working pressure ever does.

 CTA

Full bore and pressure tables for each colourway are on the product pages: yellow, deep green and black. Tell us the channel you sell into, the sizes you move and whether the packaging carries your brand, and we will suggest which of the three to open with — rather than shipping a mixed pallet that sits. Custom colours, print and packaging run under OEM/ODM.

company profile
Qingdao Wanbang Huasheng Trading Co., Ltd. supplies three-layer PVC garden hose in bulk rolls to distributors, garden centres and brand owners, with OEM/ODM support for custom colours, print, packaging and roll lengths.

  • * Name
  • * E-mail
  • Phone or WhatsApp
  • Country
  • Color
  • Size
Verification Code
WANBANG HUASHENG